 TMI Coatings has considerable experience installing coatings that are subject to all types of extreme environments. TMI completed a project involving a liquid natural gas tank 147' diameter x 121' high, loacated in Garner, Iowa.. Upon inspection, we found the vessel required spot maintenance on all stiffener rings, seams and pinhole failure areas.
TMl Coatings' scope of work included mechanical preparation of all rusty spots on the exterior of the tank to clean for coating adhesion. TMI then spot coated all mechanically prepared areas with a high performance, rust-inhibitive epoxy coating that can be applied at very, very low temperatures. A final top coat was applied over the entire vessel for an aesthetically pleasing finish. The final result was a satisfied customer with a well maintained vessel and no loss of production time.
TMI Coatings has considerable experience in cleaning and painting complex industrial structures. Our knowledgeable sales people personally meet with you to understand the scope of work required to complete your project. A proposal will be submitted listing each step of the work - including a step-by-step explanation of what is to be done, proposed materials, cost to perform the work, timeframe in which the work will be done and a warranty.
In business since 1985 and having completed thousands of successful jobs, we assure you we are committed to customer service. Let our tank maintenance experts assist you in designing a coating system for your facility.
As a SSPC QP 1/and SSPC QP 2 qualified contractor, TMI has met the strict requirements of the SSPC Industrial Hazard Paint Removal. This is an intense certification program, costly and requiring ongoing information submittal, annual reveiws, and site visits by SSPC. (The Society of Protective Coatings) QP 1 certification is a nationally recognized program that evaluates the practices of industrial painting contractors in key areas of business. The QP 2 certification evaluates the capabilities of industrial paint contractors for their ability to safely remove and properly manage hazardous coating material in the feild. QP 2 builds on the standards and guidelines of QP 1 to further qualify the industrial contractor company in hazardous paint removal operations. TMI has the competence, experience, and ability to complete any complex project..
 |
 |
| Before |
After |
| TMI Coatings performed protective coating work on three dust collectors, structural steel, and catwalks at Mycogen Seeds in Marshalltown, Iowa. TMI performed pressure washing to thoroughly clean all dust collectors and catwalks before applying coatings. All steel was primed with a rust-inhibitive metal primer before applying a direct-to-metal paint coating material suitable for industrial environments. |
|
