Painting Ammonia Tank

TMI Coatings recently completed a large coating project at an ammonia storage facility in Grand Forks, ND.  The project consisted of a substantial amount of lineal footage of various sized piping to be sandblasted prior to applying a three-coat zinc, epoxy, urethane system. The dome portion of a large storage tank, over 16,000 sq. ft., was water blasted with 4,000 psi washers and rust areas were mechanically abraded to SSPC-SP3 prior to coating application.  TMI then proceeded to apply three full coats of the specified coating material per manufacturer’s recommendation.

Painting Ammonia Tank