Ceiling and Wall Coatings
TMI FIBERLIFE (low odor) coating for ceilings and walls provides a seamless surface that is tough, durable, and easily cleaned. FIBERLIFE will not promote mold or mildew growth.
TMI FIBERLIFE is FSIS approved and meets USDA requirements for use in federally inspected meat and poultry plants. Because FIBERLIFE is reinforced, it is suitable for industrial use.
Preparing the surface for FIBERLIFE
FIBERLIFE application to walls
Surfaces are cleaned and abraded to prepare them for proper adhesion. FIBERLIFE can be spray-applied or hand laid-up. Resin is applied and fiberglass mat is embedded into the wet resin. Additional resin is applied as necessary to complete the wetting out of all glass fibers. Seams of the fiberglass are overlapped to ensure the entire area is fully coated with mat; the overlap is visible. Also, if the substrate is concrete block, the outline of the block (along grout lines) will be apparent. A final seal coat of resin is then applied for a smooth, sanitary finish.
The finished surface is easily cleaned and can withstand constant washing. With FIBERLIFE, there’s no need to worry about peeling or flaking paint. There is virtually NO ODOR during installation, making the application ideal for food plant environments.
- Stain resistant with urethane top coat
- Easy maintenance
Elastomeric Waterproof Coating with Fiber
Finished ceiling/wall coating
TMI Elastomeric Waterproof Coating is a liquid applied, elastomer coating with fiber reinforcement. It is suitable for interior and exterior surfaces. It is durable enough to withstand years of rigorous wash downs without flaking and peeling. The elastomeric and resilient qualities of the product make it highly chip and crack resistant. It adheres tenaciously to properly cleaned and prepared surfaces. Elastomer coating is most commonly applied to ceilings and upper portion of walls.
- For use over surfaces requiring a USDA finish for incidental food contact
- Food grade wall coating
- Food grade ceiling coating
- Mildew resistant
- Synthetic fiber reinforcement to enhance physical toughness, reduce sagging and improve mud crack resistance
- Low temperature flexibility from -25° F to 200° F
Industrial Ceiling and Wall Coatings Service Area and Recent Projects
TMI coatings provides services for ceiling and wall coatings throughout the United States including:
For more information on our industrial ceiling and wall coating jobs, visit Recent Southern Service Area Jobs. We provide services in most states. If your location is not listed, please contact TMI Coatings or request a quote: