Categories
TMI Coatings Projects See us in action here
|
 Category Government
TMI Coatings' Chemical and Abrasion Resistant Flooring Systems  If your company participates in the 5S program to maintain a neat, safe and orderly plant, we can install floor coating and logos for aisles and identify busy intersections. TMI Coatings installs a wide variety of flooring systems ranging from thin-film (3-5 mils) for dust control of concrete up to 1/4" thick floor toppings for heavy industrial use. Some of the benefits you receive include decreased spalling of concrete and reduced maintenance cost because it is easier to clean the floor and increased morale of employees when working in an aesthetically pleasing area. One of TMI's customers called recently to have the floors coated in the manufacturing area and Machine Shop because he wanted to "create nicer environment for the employees working in those areas". When the TMI salesperson called to follow up after the job was completed, he said, "Now we will sweep and mop to keep it looking nice!". Coatings can be applied so that the finished surface is smooth or aggregate can be added to provide slip resistance required for safety. Our sales associates will work with you to determine the best suitable and cost effective flooring system for your needs. Contact us today.
Insulation
Tank Demolition
TMI Coatings has a proven track record in the dismantling and demolition of a wide variety of tanks. The following describes specific projects in which TMI safely and professionally dismantled and disposed of tanks following the Environmental Protection Agency's (EPA) rules and regulations. TMI removed the existing foam insulation and then demolished two 75,000 gallon water storage tanks. The tanks were located on the roof of a large group of silos at Quaker Oats. State: Iowa TMI removed the existing foam insulation and demolished a one million gallon welded steel tank, 117 ft. in diameter x 42 ft. high. The tank also had red lead primer, requiring the removal of foam to be done by trained TMI workers. The existing foam insulation was transported and incinerated outstate, per environmental regulations. State: Minnesota TMI removed the existing roof of a 95 ft. diameter water reservoir and replaced the roof with a new aluminum geodesic dome. The existing roof on this tank was seriously corroded and required replacement. A 150-ton crane was used to hoist the new geodesic roof frame into place on top of the reservoir after being constructed on the ground adjacent to the tank. State: Minnesota TMI performed a demolition and removal of a 500,000 gallon elevated water storage tank. State: Texas Municipal Water Tank Maintenance
 Tank rehabilitation and maintenance work can be completed without the need to publicly bid the work. TMI Coatings contracts directly with tank owners. The work will include all labor, materials and equipment necessary to maintain the water tank for several years. Products and Services Offered Cleanout/Inspection
Tests – for hazardous paint, metal thickness, mil thickness of paint, and paint adhesion
Repair/welding
Sandblasting/painting
Logo installation
Disinfection
On-going maintenance, includes annual tank cleanout
Your Benefits Extends your guarantee on tank work for the life of the maintenance contract.
Gives you a single source to contact for all maintenance work.
Financing by TMI Coatings to fit your budget for tank maintenance.
Extends the tank life and usefullness.
Predictive annual costs to aid in municipal budgets.
Pleasing appearance of water tank.
Proactive versus reactive tank maintenance to manage costs over time.
Standards, Codes, Rules & Regulations TMI Will Comply With A REGISTERED PROFESSIONAL ENGINEER will review work being done on all water tank maintenance service work
FEDERAL, STATE, and LOCAL RULES AND REGULATIONS
SSPC – The Society for Protective Coatings
ASME – American Society of Mechanical Engineers
ASTM – American Society for Testing Materials
Safety TMI inspects all the items of safety on the tank to assure compliance with OSHA regulations.
Repairs Exterior and interior tank maintenance including weld modifications to ensure the tank’s structural integrity is in compliance with AWWA requirements.
Coating Inspection We can perform a visual inspection, ultrasonic test (test metal thickness), lead/chromium paint test (to determine percent of lead and chromium in paint), mil thickness test (to test coating thickness); cross hatch test (for coating adhesion) and coating composite test (to determine type of existing coating) on your tank.
Interior and Exterior Painting Complete tank refurbishing inside and outside your ground or elevated water storage tank.
About TMI TMI is a SSPC-QP 1 and QP 2 certified contractor, experienced in complex industrial projects, including hazardous paint removal.
With TMI you can expect our crews to perform the work rather than “brokered labor”. All painting work is performed by TMI.
We are licensed in numerous states, bonded and insured.
Terms Total payments to TMI will not exceed the water utility charge received by the municipality.
Total payments will be allocated over not less than three years from commencement of the contract.
SANDBLASTING & PAINTING
TMI Coatings has considerable experience in cleaning and painting complex industrial structures. Our knowledgeable sales people personally meet with you to understand the scope of work required to complete your project. A proposal will be submitted listing each step of the work - including a step-by-step explanation of what is to be done, proposed materials, cost to perform the work, timeframe in which the work will be done and a warranty. As a SSPC QP 1 and SSPC QP 2 qualified contractor, TMI has met the strict requirements of the SSPC Industrial Hazard Paint Removal. This is an intense certification program, costly and requiring ongoing information submittal, annual reveiws, and site visits by SSPC (The Society of Protective Coatings). QP 1 certification is a nationally recognized program that evaluates the practices of industrial painting contractors in key areas of business. The QP 2 certification evaluates the capabilities of industrial paint contractors for their ability to safely remove and properly manage hazardous coating material in the feild. QP 2 builds on the standards and guidelines of QP 1 to further qualify the industrial contractor company in hazardous paint removal operations. TMI has the competence, experience, and ability to complete any complex project.
TMI Coatings performed protective coating work on three dust collectors, structural steel, and catwalks at Mycogen Seeds in Marshalltown, Iowa. TMI performed pressure washing to thoroughly clean all dust collectors and catwalks before applying coatings. The steel was sandblasted to clean and roughen further creating an anchor pattern for new paint adhesion. All steel was primed with a rust-inhibitive metal primer before applying a direct-to-metal paint coating material suitable for industrial environments. Linings
Linings are necessary in tanks or pits to protect metal and concrete from chemical attack. Our confined-space trained crews handle a diverse array of linings for industry. |
|||||||||||||||||||||||||||||||||||||||||||||||
© 2008 TMI Coatings, Inc. - St. Paul, MN | Contact Us | Site Map | Industrial Coating Contractors | Industry Links